To activate the Uconnect
姞
Phone from idle,
simply press the
button and follow the
audible prompts for directions. All Uconnect
姞
Phone sessions begin with a press of the
button on the radio control head.
Cancel Command
At any prompt, after the beep, you can say
“Cancel” and you will be returned to the main
menu. However, in a few instances the system
will take you back to the previous menu.
Pair (Link) Uconnect
姞
Phone to a Mobile
Phone
To begin using your Uconnect
姞
Phone, you
must pair your compatible Bluetooth
姞
enabled
mobile phone (refer to “Introduction” section to
learn about the phone type).
To complete the pairing process, you will need
to reference your mobile phone owner’s
manual. The Uconnect
姞
website may also pro-
vide detailed instructions for pairing.
The following are general phone to Uconnect
姞
Phone pairing instructions:
•
Press the
button to begin.
•
After the “Ready” prompt and the following
beep, say “Setup Phone Pairing”.
•
When prompted, after the beep, say “Pair a
Phone” and follow the audible prompts.
•
You will be asked to say a four-digit Personal
Identification Number (PIN), which you will
later need to enter into your mobile phone.
You can enter any four-digit PIN. You will not
need to remember this PIN after the initial
pairing process.
•
For identification purposes, you will be
prompted to give the Uconnect
姞
Phone a
name for your mobile phone. Each mobile
phone that is paired should be given a unique
phone name.
•
You will then be asked to give your mobile
phone a priority level between 1 and 7, with 1
being the highest priority. You can pair up to
seven mobile phones to your Uconnect
姞
Phone. However, at any given time, only one
mobile phone can be in use, connected to
your Uconnect
姞
System. The priority allows
the Uconnect
姞
Phone to know which mobile
phone to use if multiple mobile phones are in
the vehicle at the same time. For example, if
priority 3 and priority 5 phones are present in
the vehicle, the Uconnect
姞
Phone will use
the priority 3 mobile phone when you make a
call. You can select to use a lower priority
mobile phone at any time (refer to “Advanced
Phone Connectivity”).
Dial by Saying a Number
•
Press the
button to begin.
•
After the “Ready” prompt and the following
beep, say “Dial”.
•
The system will prompt you to say the num-
ber you want to call.
•
For example, you can say “151-1234-5555”.
•
The Uconnect
姞
Phone will confirm the phone
number and then dial. The number will ap-
pear in the display of certain radios.
Call by Saying a Name
•
Press the
button to begin.
•
After the “Ready” prompt and the following
beep, say “Call”.
•
The system will prompt you to say the name
of the person you want to call.
64
PAGE POSITION: 66 JOB: @zeta.tweddle.com/InfoShareAuthoroChrysler/CLS_InfoShareAuthoroChrysler/GRP_Owners_Manual/JOB_1180441-en-2013-WRANGLER-EE-13JK72-126-ENG-AA/DIV_Owners_Manual_v1