Jeep Grand Cherokee SRT 2018, Owner'S Manual, Page: 288 / 666

Press the “Race Options” button on the touch-
screen while in the Drive Modes screen, to
display the vehicle’s Launch Control screen.
Within Race Options, you can activate, deacti-
vate, and adjust the RPM values for the Launch
Control and Shift Light features.
Launch Control
WARNING!
Launch Mode is intended for off-highway or
off-road use only and should not be used on
any public roadways. It is recommended that
this feature be used in a controlled environ-
ment, and within the limits of the law. The
capabilities of the vehicle as measured by the
performance pages must never be exploited
in a reckless or dangerous manner, which
can jeopardize the user’s safety or the safety
of others. Only a safe, attentive, and skillful
driver can prevent accidents.
Launch Control can be accessed by pushing the
Launch button on the Selec-Track switch or
pushing the SRT button on the Selec-Track
switch then selecting the “Race Options” button
on the touchscreen. Press the “Activate Launch
Control” button on the touchscreen to activate
the feature. Press the “Launch RPM Set-Up” to
set the holding RPM. Launch Mode can be
turned on or off by either pushing the Launch
Control button on the Selec-Track Switch, or by
pressing the “Cancel Launch Mode” button on
the touchscreen.
NOTE:
Launch RPM Set-Up cannot be accessed un-
less Launch Mode is deactivated.
To adjust the Launch RPM, drag the slider bar or
press the arrows on the touchscreen to adjust
the holding RPM. The launch RPM limit will
display in the head units tachometer display.
Shift Light
Your vehicle is equipped with a shift light feature
that illuminates the back lighting of the tachom-
eter (in red) within the instrument cluster display.
This feature is a visual cue to manually up-shift
using the paddle shifters.
To actuate the Shift Light feature, press the
“Shift Light” button on the touchscreen, then
press the “Shift Light On” button on the touch-
screen. Activation is shown on the instrument
cluster display. Pressing the “Shift Light RPM
Set-Up” button on the touchscreen will take you
to the Shift Light RPM Set-Up screen.
Activate Launch Control Launch RPM Set-Up
285