Jeep GRAND CHEROKEE L 2021, Owner'S Manual

Page: 52 / 388

50 GETTING TO KNOW YOUR VEHICLE
Power Folding
To fold the door mirrors in using the Power Folding
Mirror function, rotate the control switch to the
power folding position. Rotating the control to the
left, right, or neutral position will return the mirrors
to the driving position.
If the power mirror control switch is moved again
during door mirror folding (from closed to open
position and vice versa), the movement direction is
reversed.
Resetting The Power Folding Outside Mirrors
You may need to reset the power folding mirrors if
the following occurs:

The mirrors are accidentally blocked while
folding.

The mirrors are accidentally manually folded/
unfolded (by hand or by pushing the power
folding mirror switch).

The mirrors come out of the unfolded position.

The mirrors shake and vibrate at normal driving
speeds.
To reset the power folding mirrors: Fold and unfold
them by turning the switch (this may require
multiple switch activations to synchronize the
driver and passenger mirror). This resets them to
their normal position.
Power mirror position can be saved as part of the
Driver Memory Settings (if equipped)
Ú
page 32.
A
UTOMATIC
P
OWER
F
OLDING
M
IRRORS
— I
F
E
QUIPPED
When enabled within Uconnect Settings
Ú
page 193, the exterior mirrors will automatically
fold when the ignition is placed in the OFF position
while all doors are still closed and locked.
If the exterior mirrors were folded automatically,
they will unfold when the ignition is placed in the
ON/RUN position.
NOTE:
If the mirrors were folded manually, by using the
power folding mirror switch on the driver’s door
panel, they will not automatically unfold.
H
EATED
M
IRRORS
— I
F
E
QUIPPED
These mirrors are heated to melt frost or
ice. This feature will be activated
whenever you turn on the rear window
defroster (if equipped)
Ú
page 63.
T
ILT
S
IDE
M
IRRORS
I
N
R
EVERSE
—
I
F
E
QUIPPED
Tilt Side Mirrors In Reverse provides automatic
outside mirror positioning which will aid the
driver’s view of the ground rearward of the front
doors.
Outside mirrors will move slightly downward from
the present position when the vehicle is shifted
into REVERSE. Outside mirrors will then return to
the original position when the vehicle is shifted out
of REVERSE position. Each stored memory setting
will have an associated Tilt Side Mirrors In Reverse
position.
NOTE:
The Tilt Side Mirrors In Reverse feature can be
turned on and off using the Uconnect system
Ú
page 193.
UNIVERSAL GARAGE DOOR OPENER
(HOMELINK®) — IF EQUIPPED
HomeLink® Buttons And Indicator Light
21_WL_OM_EN_USC_t.book Page 50