Jeep GRAND CHEROKEE 4xe 2023, Owner'S Manual

Page: 107 / 440

GETTING TO KNOW YOUR INSTRUMENT PANEL 105
E
NGINE
O
IL
L
IFE
R
ESET
Oil Change Required
Your vehicle is equipped with an engine oil change
indicator system. The “Oil Change Due” message
will display for approximately five seconds after a
single chime has sounded, to indicate the next
scheduled oil change interval has been reached.
The engine oil change indicator system is duty
cycle based, which means the engine oil change
interval may fluctuate due to ambient
temperatures, engine warm-up and personal
driving style.
Unless reset, this message will continue to display
each time the ignition is placed in the ON/RUN
position. To turn off the message temporarily, push
and release the OK or arrow buttons. To reset the
oil change indicator system (after performing the
scheduled maintenance), refer to the following
procedure.
Vehicles Equipped With Keyless Enter ‘n Go™ —
Ignition
Use the steering wheel instrument cluster display
controls for the following procedure(s):
1. Without pressing the brake pedal, push the
ENGINE START/STOP button and place the
ignition in the ON/RUN position (do not start
the engine).
2. Push and release the down arrow button to
scroll downward through the main menu to
“Vehicle Info”.
3. Push and release the right arrow button to
access the “Oil Life” screen.
4. Push and hold the OK button to reset oil life. If
conditions are met, the gauge and numeric
display will update to show 100%. If conditions
are not met a pop-up message of “To reset oil
life engine must be off with ignition in run” will
be displayed (for five seconds), and the user
will remain at the Oil Life screen.
5. Push and release the up or down arrow
button to exit the submenu screen.
NOTE:
If the indicator message illuminates when you start
the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.
Secondary Method Of Resetting Engine Oil Life
1. Without pressing the brake pedal, push the
ENGINE START/STOP button and place the
ignition to the ON/RUN position (do not start
the engine).
2. Fully press the accelerator pedal, slowly, three
times within 10 seconds.
3. Without pushing the brake pedal, push the
ENGINE START/STOP button once to return the
ignition to the OFF position.
NOTE:
If the indicator message illuminates when you start
the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.
CAUTION!
If the instrument cluster instructs you to change
the engine oil, do not reset the service indicator
without changing the oil. Engine damage may
result.
3
23_WL_H_OM_EN_EE_t.book Page 105