Jeep GRAND CHEROKEE 4XE 2022, Manual, Page: 37 / 72

GETTING TO KNOW YOUR INSTRUMENT PANEL 35
O
IL
L
IFE
R
ESET

Your vehicle is equipped with an engine oil
change indicator system. The “Oil Change Due”
message will display for approximately five
seconds after a single chime has sounded, to
indicate the next scheduled oil change interval
has been reached. The engine oil change indi -
cator system is duty cycle based, which means
the engine oil change interval may fluctuate due
to ambient temperatures, engine warm-up and
personal driving style.

Unless reset, this message will continue to
display each time the ignition is placed in the
ON/RUN position.

To reset the oil change indicator, refer to the
following procedure.
NOTE:
This procedure should only be performed after
scheduled maintenance is completed. Resetting oil
life other than when associated with a scheduled
maintenance may result in damage due to not
properly maintaining the engine oil.
1. Without pressing the brake pedal, push the
ENGINE START/STOP button and place the
ignition in the ON/RUN position (do not start
the vehicle).
2. Push the OK button to enter the instrument
cluster display menu screen.
3. Push and release the down arrow button to
access the ”Vehicle Info” menu screen.
4. Push the left arrow button or right arrow
button to access the “Oil Life” submenu.
5. Hold the OK button to reset the “Oil Life” to
100%.
6. Push the up arrow button to exit the
instrument cluster display menu screen.
Secondary Method For Oil Life Reset Procedure
1. Without pushing the brake pedal, place the
ignition in the ON/RUN position (do not start
the engine).
2. Fully press the accelerator pedal, slowly, three
times within 10 seconds.
3. Without pushing the brake pedal, place the
ignition in the OFF position.
NOTE:
If the indicator message illuminates when you start
the vehicle, the oil change indicator system did not
reset. If necessary, repeat this procedure.
E
LECTRIC
M
ODE
T
EMPORARILY
U
NAVAILABLE
If Electric Mode is unavailable, the reason will display
for five seconds at start up. If your check engine light
comes on, see an authorized dealer immediately.
Electric Mode Temporarily Unavailable Message
See the following information for the most
common reasons the Electric Mode would be
unavailable:
Operator choices that can inhibit Electric Mode

Transmission control using Paddle Shifters -
Return to auto mode to use Electric Mode.

Heavily depressed accelerator pedal position,
requesting high power demand - Beyond the
limits of the electric drivetrain, will cause engine
to run, enabling the powertrain to produce its
full combined power available in Hybrid mode.
3
22_WL_H_SU_EN_USC_t.book Page 35