Jeep grand cherokee 2018, Manual

Page: 16 / 82

5. Push and release the down arrow button to select “Yes,”
then push and release the OK button to select reset of
the Fuel Filter Life.
6. Push and release the up arrow button to exit the
instrument cluster display screen.
NOTE: If the indicator message illuminates when you
start the vehicle, the fuel filter indicator system did not
reset. If necessary, repeat this procedure.
Diesel Displays
When the appropriate conditions exist, the following mes-
sages display in the instrument cluster display:
•
Exhaust Filter Nearing Full Safely Drive at Highway
Speeds to Clear
•
Exhaust Filter Full – Power Reduced See Dealer
•
Exhaust System Service Required – See Dealer
•
Exhaust System – Filter XX% Full Service Required See
Dealer
•
Exhaust System Regeneration in Process Continue Driv-
ing
•
Exhaust System – Regeneration Completed
•
Engine Will Not Restart in XXXX mi DEF Low Refill
Soon
•
Engine Will Not Restart in XXXX mi Refill DEF
•
Engine Will Not Start Refill DEF
•
Service DEF System See Dealer
•
Incorrect DEF Detected See Dealer
•
Engine Will Not Restart in XXX mi Service DEF See
Dealer
•
Engine Will Not Restart Service DEF System See Dealer
•
Engine Will Not Start Service DEF System See Dealer
Diesel Particulate Filter (DPF) Messages
This engine meets all required diesel engine emissions
standards. To achieve these emissions standards, your
vehicle is equipped with a state-of-the-art engine and
exhaust system. These systems are seamlessly integrated
into your vehicle and managed by the Powertrain Control
Module (PCM). The PCM manages engine combustion to
allow the exhaust system’s catalyst to trap and burn
Particulate Matter (PM) pollutants, with no input or inter-
action on your part.
3
GETTING TO KNOW YOUR INSTRUMENT PANEL 15