Jeep Gladiator 2021, Owner'S Manual, Page: 53 / 484

GETTING TO KNOW YOUR VEHICLE 51
Flash-To-Pass feature. When the lever is
released, the Flash-To-Pass feature will
deactivate.
A
UTOMATIC
H
EADLIGHTS
— I
F
E
QUIPPED
The Automatic Headlight System will turn the
headlights on or off according to ambient light
levels. To turn the system on, rotate the
headlight switch clockwise to the last detent for
automatic headlight operation. When the
system is on, the headlight time delay feature is
also on. This means the headlights will stay on
for up to 90 seconds (programmable through
the Uconnect Settings
Ú
page 224) after you
place the ignition into the OFF position. To turn
the automatic system off, move the headlight
switch out of the AUTO position.
NOTE:
The engine must be running before the head -
lights will come on in the automatic mode.
L
IGHTS
-O
N
R
EMINDER
If the headlights or parking lights are left on
after the ignition is placed in the OFF position,
the vehicle will chime when the driver’s door is
opened.
F
RONT
F
OG
L
IGHTS
— I
F
E
QUIPPED
The Front Fog Lights are located on the front of
the vehicle below the headlights. When
activated, these lights add illumination directed
at the driving surface to aid in poor visibility
conditions.
To activate the Front Fog Lights, turn on the
parking lights or low beam headlights and push
the fog light switch. Pushing the fog light switch
a second time will turn the front fog lights off.
Front Fog Light Switch
T
URN
S
IGNALS
Move the multifunction lever up or down to
activate the turn signals. The arrows on each
side of the instrument cluster flash to show
proper operation.
NOTE:
If either light remains on and does not flash, or
there is a very fast flash rate, check for a defec -
tive outside light bulb.
L
ANE
C
HANGE
A
SSIST
— I
F
E
QUIPPED
Lightly push the multifunction lever up or down,
without moving beyond the detent, and the turn
signal will flash three times then automatically
turn off.
B
ED
L
IGHTS
— I
F
E
QUIPPED
The bed lights will illuminate the bed and cargo
area. Bed lights are turned on by pushing the
bed light switch located on the lower half of the
headlight switch.
Bed Light Switch
2