Jeep Gladiator 2021, Owner'S Manual, Page: 446 / 484

444 SERVICING AND MAINTENANCE
image, to fully de-energize both batteries for
storage. If assistance is needed to discon -
nect the battery system, see an authorized
dealer.

Do not disconnect the Intelligent Battery
Sensor (IBS), or your Stop/Start system may
not function for up to 24 hours, due to the IBS
being set into learn mode.
BODYWORK
P
ROTECTION
F
ROM
A
TMOSPHERIC
A
GENTS
Vehicle body care requirements vary according
to geographic locations and usage. Chemicals
that make roads passable in snow and ice and
those that are sprayed on trees and road
surfaces during other seasons are highly
corrosive to the metal in your vehicle. Outside
parking, which exposes your vehicle to airborne
contaminants, road surfaces on which the
vehicle is operated, extreme hot or cold
weather, and other extreme conditions will have
an adverse effect on paint, metal trim, and
underbody protection.
The following maintenance recommendations
will enable you to obtain maximum benefit from
the corrosion resistance built into your vehicle.
What Causes Corrosion?
Corrosion is the result of deterioration or
removal of paint and protective coatings from
your vehicle.
The most common causes are:

Road salt, dirt and moisture accumulation

Stone and gravel impact

Insects, tree sap and tar

Salt in the air near seacoast localities

Atmospheric fallout/industrial pollutants
B
ODY
A
ND
U
NDERBODY
M
AINTENANCE
Cleaning Headlights
Your vehicle is equipped with plastic headlights
and fog lights that are lighter and less
susceptible to stone breakage than glass
headlights.
Plastic is not as scratch resistant as glass and
therefore different lens cleaning procedures
must be followed.
To minimize the possibility of scratching the
lenses and reducing light output, avoid wiping
with a dry cloth. To remove road dirt, wash with
a mild soap solution followed by rinsing.
Do not use abrasive cleaning components,
solvents, steel wool, or other aggressive
material to clean the lenses.
P
RESERVING
T
HE
B
ODYWORK
Washing

Wash your vehicle regularly. Always wash
your vehicle in the shade using Mopar® Car
Wash, or a mild car wash soap, and rinse the
panels completely with water.

If insects, tar, or other similar deposits have
accumulated on your vehicle, use Mopar®
Super Kleen Bug and Tar Remover to
remove.

Use a high quality cleaner wax, such as
Mopar® Cleaner Wax, to remove road film
and stains, and to protect your paint finish.
Use precautions to not scratch the paint.

Avoid using abrasive compounds and power
buffing that may diminish the gloss or thin
out the paint finish.