Jeep Compass 2022, Owner'S Manual, Page: 123 / 344

STARTING AND OPERATING 121
To Set A Desired Speed
When the vehicle reaches the speed desired, push
the SET (+) button or the SET (-) button and
release. The instrument cluster display will show
the set speed.
NOTE:
Fixed Speed Cruise Control can be used without
ACC enabled. To change between the different
modes, push the ACC on/off button which turns
the ACC and the Fixed Speed Cruise Control off.
Pushing the Fixed Speed Cruise Control on/off
button will result in turning on (changing to) Fixed
Speed Cruise Control mode.
If ACC is set when the vehicle speed is below
20 mph (32 km/h), the set speed will default to
20 mph (32 km/h).
NOTE:
Fixed Speed Cruise Control cannot be set below
20 mph (32 km/h).
If either system is set when the vehicle speed is
above 20 mph (32 km/h), the set speed shall be
the current speed of the vehicle.
NOTE:

Keeping your foot on the accelerator pedal can
cause the vehicle to continue to accelerate
beyond the set speed. If this occurs, the
message “DRIVER OVERRIDE” will display in the
instrument cluster display.

If you continue to accelerate beyond the set
speed while ACC is enabled, the system will not
be controlling the distance between your vehicle
and the vehicle ahead. The vehicle speed will
only be determined by the position of the accel -
erator pedal.
To Cancel
The following conditions cancel the ACC or Fixed
Speed Cruise Control systems:

The brake pedal is applied

The CANC (cancel) button is pushed

The Anti-Lock Brake System (ABS) activates

The gear selector is removed from the DRIVE
position

The Electronic Stability Control/Traction Control
System (ESC/TCS) activates

The vehicle parking brake is applied

The Trailer Sway Control (TSC) activates

The driver switches ESC to Full Off mode

The braking temperature exceeds normal range
(overheated)
The following conditions will only cancel the ACC
system:

Driver seat belt is unbuckled at low speeds

Driver door is opened at low speeds
To Turn Off
The system will turn off and clear the set speed in
memory if:

The Adaptive Cruise Control (ACC) on/off button
is pushed

The Fixed Speed Cruise Control on/off button is
pushed

The ignition is placed in the OFF position

4WD Low is engaged
WARNING!
In Fixed Speed Cruise Control mode, the system
will not react to vehicles ahead. In addition, the
proximity warning does not activate and no
alarm will sound even if you are too close to the
vehicle ahead since neither the presence of the
vehicle ahead nor the vehicle-to-vehicle distance
is detected. Be sure to maintain a safe distance
between your vehicle and the vehicle ahead.
Always be aware which mode is selected.
4
22_MP_OM_EN_USC_t.book Page 121