Jeep Compass 2013, Owner'S Manual

Page: 333 / 525

Operation
NOTE: AutoStick® is not available until the CVT warms
up in cold weather.
When the shift lever is in the DRIVE position, AutoStick®
is activated by moving the shift lever side-to-side. Mov-
ing the shift lever to the right (+) will activate AutoStick®
and shift up to the next higher manual ratio, unless you
are already operating in or near Overdrive, in which case
sixth gear ratio will be selected. In like manner, moving
the shift lever to the left (-) will activate AutoStick® and
shift to the next lower manual ratio. The manually-
selected gear will be displayed in the instrument cluster.
In AutoStick® mode, the transmission will shift up or
down when the driver moves the shift lever to the right
(+) or left (-), unless an engine lugging or overspeed
condition would result. It will remain in the selected gear
until another upshift or downshift is chosen, except as
described below:
•
The transmission will automatically downshift to first
gear when coming to a stop. After a stop, the driver
should manually upshift (+) the transmission as the
vehicle is accelerated.
•
The transmission will automatically upshift when nec-
essary to prevent engine over-speed.
•
If a downshift would cause the engine to overspeed,
that shift will not occur until it is safe for the engine.
•
Transmission shifting will be more noticeable when
AutoStick® is engaged.
•
Heavy Anti-Lock Brake System (ABS) application will
disengage AutoStick® mode.
5
STARTING AND OPERATING 331