Jeep Cherokee 2019, Owner'S Manual, Page: 288 / 636

• Vehicle is in 4LO transfer case mode (if equipped with
4WD).
•
Brake pedal is not pressed with sufficient pressure with
vehicle in DRIVE position.
Other Factors Which Can Inhibit Autostop Include:
• Accelerator pedal input.
• Engine temp too high.
•
5 mph threshold not achieved from previous AU-
TOSTOP.
• Steering angle beyond threshold.
•
ACC is on and speed is set.
It may be possible for the vehicle to be driven several times
without the STOP/START system going into a STOP/
START READY state under more extreme conditions of the
items listed above.
To Start The Engine While In Autostop Mode
While in a forward gear, the engine will start when the
brake pedal is released or the throttle pedal is depressed.
The transmission will automatically re-engage upon en-
gine restart.
Conditions That Will Cause The Engine To Start
Automatically While In Autostop Mode:
• The transmission gear selector is moved out of DRIVE
except in the PARK position.
• To maintain cabin temperature comfort.
•
HVAC is set to full defrost mode.
• HVAC system temperature or fan speed is manually
adjusted.
•
Battery voltage drops too low.
• Low brake vacuum (e.g. after several brake pedal appli-
cations).
• STOP/START OFF switch is pushed.
•
A STOP/START system error occurs.
• 4WD system is put into 4LO mode (if equipped with
4WD).
286 STARTING AND OPERATING