0
C
0
(J
C
0
(J
Q
C
�
Cl
Cl
40
mph of preset speed). The system, which can be set at
speeds above 30 mph, disengages when the brake pedal is
touched. The two controls on the turn signal lever should be
operated as follows:
1. Obtain desired speed with accelerator ( over 30 mph).
2. Slide switch from OFF to ON to energize system.
3. Press set-speed button on end of lever to engage system.
Cruise
Command
Controls
4.
Remove loot from accelerator-speed will be automat
ically controlled .
WARNING:
Do not use Cruise Command in heavy or varying
trafftc, or on slippery or winding roads.
To Disengage System
Simply apply brakes or move slide switch from ON to OFF.
NOTE:
Moving the slide switch to the OFF position removes
the preset speed selection from the system.
To Resume Preset Speed
1.
Bring vehicle speed up to 30 mph (ii necessary).
2. Slide switch to RESUME and release.
3. Vehicle will automatically resume preset speed.
To Increase Speed Setting
1. Accelerate to desired speed by applying accelerator.
Summary of Contents for Cherokee 1977
Page 1: ......
Page 132: ...NOTES...
