3. Remove the plastic wiring access door under
the instrument panel by sliding the plastic
panel along the door frame toward the seats
until the tabs are detached.
NOTE:
Do not pry back to open, as this will break the
plastic cover.
4. Pull up on the red locking tab to unlock the
wiring harness.
5. Push and hold down the black security tab
under the wiring harness, and lift the har-
ness into the open position.
6. With the wiring harness open, pull down-
ward on the wiring connector to unplug.
Store wiring connector in the lower door
basket.
7. Remove the check screw from the center
door check (using a #T40 Torx head driver).
Wiring Access Door
Closed Wiring Harness
1 – Locking Tab
2 – Wiring Harness
Door Check
