Jeep 2013 Grand Cherokee, Operating Information Manual

Page: 206 / 408

Video Screen Operation
Displaying Video
The video screen has two different operating
modes, a video mode (when displaying video
such as DVD video, Aux video, etc.) and an
information mode as shown in Figure 5. Because
the VES™ is a dual channel system, Information
Mode is displayed in a split screen format. When
in Information Mode, the left side of the screen is
referred to as Channel 1 and the right side of the
screen is referred to as Channel 2.
Only Channel 1 displays video images. When in
video mode the image is displayed on the full
screen, however Channel 2’s functionality is still
available. A popup banner at the bottom of the
screen is displayed momentarily over the video
image. While in video mode and Channel 2 is
selected on the remote control selector switch,
the first remote control key press will activate
the popup banner indicating Channel 2’s status.
While the banner is still visible, any subsequent
remote control key press for Channel 2 shall
initiate the requested remote control command.
In a two-screen system, the video for Channel 1
is displayed on the first rear seat screen and the
video for Channel 2 is displayed on the second
rear seat screen. Information Mode is displayed
in split screen, the left side of the screen
(Channel 1) shows the status/mode of the first
rear seat screen and the right side of the screen
(Channel 2) shows the status/mode of the sec-
ond rear seat screen.
When Channel 1 is in a video mode, the image
is displayed on the first rear seat screen as a full
screen image. A popup banner at the bottom of
the screen is displayed momentarily over the
video image showing any change in status of
Channel 2.
When Channel 2 is in video mode, the image is
displayed on the second rear seat screen as a
full screen image. A popup banner at the bottom
of the screen is displayed momentarily over the
video image showing any change in status of
Channel 1.
Playing A Disc On The VES™
The following actions occur automatically when
a disc is inserted into the radio on a single
screen system and into the remote DVD player
on a two screen system:
•
If the video screen is in the open position (the
LCD screen is visible), then the screen turns on
and the wireless headphone transmitter turns
on. If the video screen is closed, the wireless
headphone transmitter must be turned on by
using the power button on the remote control
(headphones only receive audio signals if the
headphones are powered on).
•
After the disc is inserted, the disc begins
playing to cabin speakers, wireless head-
phones, and rear video screens.
Popup Banner
202