Jeep 2012 Liberty Owner'S Manual Download

Page: 442 / 558

CAUTION!

Do not attempt to raise the vehicle by jacking on
locations other than those indicated in the Jacking
Instructions for this vehicle.

1. Remove spare tire.

2. Remove jack and tools from mounting bracket. As-
semble the tools by connecting the driver to the exten-
sion, and then to the lug wrench.

3. Loosen (but do not remove) the wheel lug nuts by
turning them to the left one turn while the wheel is still
on the ground.

4. Locate the jack as shown. For the front tires, place it
(rearward) of the notch on the body weld seam behind
wheel to be changed.

For the rear tires, place it under the axle by the wheel to
be changed.

Front Jacking Location

440

WHAT TO DO IN EMERGENCIES

Summary of Contents for 2012 Liberty















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2012 Liberty

Reviews:

Related manuals for 2012 Liberty

Brands by name

Popular brands

Jeep 2012 Liberty, Owner'S Manual

Search results

Summary of Contents for 2012 Liberty

Reviews:

Related manuals for 2012 Liberty

Brands by name

Popular brands