Jeep 2008 Commander Owner'S Manual Download Page 85

Page: 85 / 493

Lift the cover to reveal the mirror. The light will turn on
automatically.

Sun Visor Extension (If Equipped)
This feature has a pull out extension on the sun visor for
increased coverage.

HANDS-FREE COMMUNICATION (UConnect

) —

IF EQUIPPED

NOTE:

The sales code RER radio contains an inte-

grated Hands-Free Communication (UConnect

) sys-

tem. Refer to your “Navigation User’s Manual” for
UConnect

system operating instructions for this radio.

UConnect

is a voice-activated, hands-free, in-vehicle

communications system. UConnect

allows you to dial a

phone number with your cellular phone using simple
voice commands (e.g.,

Call”

{

“Mike”

{

”Work

Dial”

{

“248-555-1212

). Your cellular phone’s audio is trans-

mitted through your vehicle’s audio system; the system
will automatically mute your radio when using the
UConnect

system.

NOTE:

The UConnect

system requires a cellular phone

equipped with the Bluetooth

t 9

Hands-Free Profile,

Ver-

sion 0.96 or higher. See the UConnect

website for

supported phones.

Lighted Vanity Mirror

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2008 Commander














































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Commander

Reviews:

Jeep 2008 Commander, Owner'S Manual, Page: 85 / 493

Search results

Summary of Contents for 2008 Commander

Reviews: