Jeep 2008 Commander Owner'S Manual Download

Page: 384 / 493

Jacking Instructions

1. Remove the spare tire, jack, and tools from storage.

2. Loosen (but do not remove) the wheel lug nuts by
turning them to the left one turn while the wheel is still
on the ground.

3. Assemble the jack and jacking tools as shown. Connect
jack handle driver (A) to two extensions (B), then to the
lug wrench (C).

Jack Warning Label

WHAT TO DO IN EMERGENCIES

383

Summary of Contents for 2008 Commander














































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Commander

Reviews:

Related manuals for 2008 Commander

Brands by name

Popular brands

Jeep 2008 Commander, Owner'S Manual

Search results

Summary of Contents for 2008 Commander

Reviews:

Related manuals for 2008 Commander

Brands by name

Popular brands