Jeep 2008 Commander Owner'S Manual Download

Page: 103 / 493

UConnect

system will return to using the highest

priority phone present in or near (approximately
within 30 ft [9 m]) the vehicle.

Delete UConnect

Paired Cellular Phones

•

Press the PHONE button to begin.

•

After the

Ready

prompt and the following beep, say

Setup Phone Pairing.

•

At the next prompt, say

Delete

and follow the

prompts.

•

You can also press the “Voice Recognition” button at
any time while the list is being played, and then
choose the phone you wish to delete.

Things You Should Know About Your UConnect

System

UConnect

Tutorial

To hear a brief tutorial of the system features, press the
PHONE button and say “UConnect

Tutorial.”

Voice Training
For users experiencing difficulty with the system recog-
nizing their voice commands or numbers, the UConnect

system Voice Training feature may be used. To enter this
training mode, follow one of the two following proce-
dures:

From outside the UConnect

mode (e.g., from radio

mode):

•

Press and hold the “Voice Recognition” button for five
seconds until the session begins, or,

•

Press the “Voice Recognition” button and say the

Setup, Voice Training

command.

102

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2008 Commander














































































































































































































































































































































































































































































































Search results

Summary of Contents for 2008 Commander

Reviews:

Related manuals for 2008 Commander

Brands by name

Popular brands

Jeep 2008 Commander, Owner'S Manual

Search results

Summary of Contents for 2008 Commander

Reviews:

Related manuals for 2008 Commander

Brands by name

Popular brands