Jeep 2004 Liberty Page 94 Owner'S Manual Download

Page: 94 / 374

This seat also has a manual recline lever located just to
the rear of the power seat switch. Pull up on the lever to
recline the seat.

65/35 Split Folding Rear Seat

To provide additional storage area, each rear seat can be
folded flat to allow for extended cargo space and still
maintain some rear seating room.

NOTE:

Prior to folding the rear seat, it may be necessary

to reposition the front seat to it’s mid-track position.

Also, be sure that the front seats are fully upright and
positioned forward. This will allow the rear seat to fold
down easily.

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 2004 Liberty























































































































































































































































































































































































Search results

Summary of Contents for 2004 Liberty

Reviews:

Related manuals for 2004 Liberty

Brands by name

Popular brands

Jeep 2004 Liberty, Owner'S Manual

Search results

Summary of Contents for 2004 Liberty

Reviews:

Related manuals for 2004 Liberty

Brands by name

Popular brands