Jeep 2004 Liberty Owner'S Manual Download Page 327

Page: 327 / 374

RECOMMENDED FLUIDS, LUBRICANTS AND GENUINE PARTS
Engine

Component

Fluid, Lubricant, or Genuine Part

Engine Coolant

Mopar

Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Or-

ganic Additive Technology)

Engine Oil

Use API Certified SAE 5W-30 Engine Oil. Refer to oil viscosity chart for cor-
rect SAE grade meeting DaimlerChrysler Material Standard MS-6395.

Oil Filter (2.4L Engine)

Mopar

Oil Filter (P/N 4105409)

Oil Filter (3.7L Engine)

Mopar

Oil Filter (P/N 04781452AA)

Spark Plugs

Refer to the Vehicle Emission Control Information label in the engine com-
partment.

Fuel Selection

87 Octane (89 Octane should be used for trailer towing purposes - 3.7L
Only).

MAINTAINING YOUR VEHICLE

327

Summary of Contents for 2004 Liberty























































































































































































































































































































































































Search results

Summary of Contents for 2004 Liberty

Reviews:

Jeep 2004 Liberty, Owner'S Manual, Page: 327 / 374

Search results

Summary of Contents for 2004 Liberty

Reviews: