HG-0269 JedMed Otoscope
Copyright © 2015 Alaska Native Tribal Health Consortium. All rights reserved.
1
AFHCAN
www.afhcan.org
Handy
Guide
JedMed Otoscope LED Combo 50
The JedMed Otoscope
1. Stand by light and
power button
2. WB—White balance
3. WND—Window Size
4. Boost—Brightness
5. Camera input
6. Light output
7. Main power supply
8. Main (external) fuse draw
9. Power cord
10. Video outputs
11.
Cooling fan
DO NOT BLOCK THE COOLING FAN
1
2
3
4
5
6
11
10
9
8
7
Operating the JedMed Otoscope
1. The Otoscope can have the
main power switch left on
when not in use.
2. Turn on the video
otoscope light source
by pressing the
yellow POWER
button. When the
power is on, the LEDs
on the front panel
will flash and then
turn green.
3. White Balance: To be performed once a week, or when the image color appears off. Used to ensure accurate
color reproduction.
To perform a white balance:
1. Aim the otoscope tip at a uniformly illuminated white sheet of paper.
2. While aiming, push and release the white balance button.
3. Monitor will beep once, the white balance is complete.
