T464 Installation and Setup
20090709 v1r0 JED Microprocessors Pty. Ltd. - Page 8 of 27
Network Parameters
The T464 leaves JED configured with DHCP, BOOTP and AutoIP enabled.
This configuration will operate in the default Windows network environment
which uses AutoIP. A DHCP server will also configure the network parameters
without any further intervention.
The following panel illustrates output after selection of option ‘a’:
Enter Function - [h(elp) - a|i|j|k|l|v|ESC]: a
Retrieving network interface software version and hardware address.
Please wait.../
MAC address 00204AA918E0
Software version V6.6.0.2 (080926) XPTEXE
Retrieving network configuration default parameters....
IP addr - 0.0.0.0/DHCP/BOOTP/AutoIP, no gateway set,netmask 255.255.0.0
DNS Server not set
DHCP device name : not set/
Retrieving network configuration parameters running currently.
Please wait...|
IP: 169.254.017.195
[via AutoIP. Random – 169.254.1.0 to 169.254.254.255]
Gateway: 000.000.000.000
[May be allocated on a Windows default network]
Mask: 255.255.000.000
Name Server: 000.000.000.000
[May be allocated on a Windows default network]
0>
Manually configure IP, Subnet Mask and Gateway? y/n:
The Network parameters display: T464 with Ethernet disconnected