T464 Installation and Setup
20090709 v1r0 JED Microprocessors Pty. Ltd. - Page 15 of 27
Input Location
The T464 can store up to 80 characters of location information to be displayed
on the administration terminal. This field may provide comments such as room
level, building, campus, etc. The Location text may be edited by selecting
option ‘l’ from the Setup Menu. Location text is entered as a single line of text
in and saved in the same way as Special Notes text. The same use of
commas also applies.
The following panel illustrates output after selecting the ‘l’ option:
Enter Function - [h(elp) - a|i|j|k|l|v|ESC]: k
Not Configured Yet.
Enter Installation Location Information [comma = CRLF]:
Room 4,Level 2,Building 4
Room 4,Level 2,Building 4
Enter=Save, Space=Redo, ESC=Exit:
Saved.
Enter Function - [h(elp) - a|i|j|k|l|v|ESC]:
Example of Location text entry
The following panel shows the resulting Administration Terminal view:
Room 4
Level 2
Building 4
Appearance of the Location text at the Administration Terminal