T464 Installation and Setup
20090709 v1r0 JED Microprocessors Pty. Ltd. - Page 12 of 27
Reset Network Interface to Factory Defaults
The T464 network configuration may be reset to factory defaults by hitting ‘y’
when prompted. Following successful restoration of network default settings,
the T464 will exit via a restart and resume normal operation.
The following panel illustrates output during default restoration:
Reset network interface to factory defaults? y/n:y
Restoring default settings, please wait...
Restoring 1 of 8....<spinner>...OK.
Restoring 2 of 8....<spinner>...OK.
Restoring 3 of 8....<spinner>...OK.
Restoring 4 of 8....<spinner>...OK.
Restoring 5 of 8....<spinner>...OK.
Restoring 6 of 8....<spinner>...OK.
Restoring 7 of 8....<spinner>...OK.
Restoring 8 of 8....<spinner>...OK.
Exit via Restart...
Example of Successful Network Default Setting Restoration