Jeanneau SUN ODYSSEY 440, Owner'S Manual, Page: 234 / 240

- 234 -
189212 RCD-2
Index C
18.4 UPPER LIMIT OF ANTIFOUL
Note: Measurements are expressed in mm.
18.5 LAUNCH/LIFT OUT
The initial commissioning of your boat will require a lot of skill and care. The proper working of
all your boat's equipment is the result of the quality of the commissioning operations. This is
why the initial launch must be overseen by your dealer.
Before launching
- Replace the log in its housing.
- Check the cleanliness of the sea water strainers.
- Check the anodes (see Chapter: E
LECTRICAL SYSTEM
).
- Check the propeller/hydrolube bush (see Chapter: S
TEERING SYSTEM
).
- Prepare enough fenders and lines.
- Check the engine's sea water intake valve and the fuel feed valve (see Chapter: E
NGINE
).
18.6 STEPPING/UNSTEPPING THE MAST
The stepping /unstepping operations require the skills of a professional rigger: please consult
your dealer.
Do not remain onboard or beneath the boat during the handling operations.
- When placing the slings make sure that the positioning marks are still
visible.
- Submerge the sling fully under the engine mounting.