Chapter 10
Test Results
Saving results
OneExpert DSL User’s Guide
78
22052280, Revision 001
April 2014
Saving results
After running tests, there are two ways to save results:
as a report
- used to save the file as text, HTML, or PDF and then export for viewing or printing
using a PC.
to a job
- used to associate test results from different applications to a single job
Saving results to a file
After running tests, you can save the results to a report file, and then export for viewing or printing.
To save results to a file
1
After your test is finished, use the Tray menu (swipe the screen from top to bottom) and then
select
Save Report
.
2
Specify the report settings.
3
Touch
Save
to save the file to internal storage.
The test results are stored.
Use the File Browser to copy the file to USB for viewing or printing using a PC.
Saving results to a job
If you have an open/active job, you can save the results to a job.
To save results to a job
1
After running a test, press the
Utility
key, and then select
Save to Job
.
2
After your test is finished, use the Tray menu (swipe the screen from top to bottom) and then
select
Save to Job
.
3
Verify the circuit ID and other job information. If the job information is not the desired job,
return to the Job Manager screen and activate the desired job.
4
Touch
Save
to save the results to the job.
The OneExpert DSL returns to the last viewed result screen.
Setting
Description
Name
Specify a file name for the report. The default file name uses the type of test fol-
lowed by a three digit number that increments with each file save (for example,
cablecheck001 or DSL002).
Format
Specify the file format for the report: Text, HTML, PDF.
Summary of Contents for OneExpert DSL
Page 1: ...OneExpert DSL User s Guide...
Page 2: ......
Page 16: ...About this Guide Conventions OneExpert DSL User s Guide xiv 22052280 Rev 000 April 2014...
Page 119: ......
