Chapter 3
Utilities
Specifying network profiles
OneExpert DSL User’s Guide
24
22052280, Revision 001
April 2014
To specify user information
1
From the System Settings menu, select
User Information
.
2
Specify the user’s first and last name, workgroup, company, email address, and other infor-
mation.
3
Press the Back/Cancel function key to exit the menu.
Specifying network profiles
The network button is used to specify and store network profiles and to enable or disable a network
profile.
To specify network profiles
1
From the System menu (
), touch the
Network
button.
A list of network profiles appears. If you are currently connected to a network, that profile will
appear at the top of the menu.
2
To modify a profile
a
Highlight the profile and then select
Edit Profile
.
b
Select
Profile Name
and then enter a name for the profile.
A descriptive name such as “Downtown IPv4/IPv6 Stateless” allows easier recognition by
other technicians (vs “Garage1” or “Branch7”).
c
Select
Network Mode
and then specify the network mode: IPv4, IPv6, or IPv4/IPv6 Dual
Stack.
Depending on the Network Mode, you may have one or more additional settings to
specify.
d
If you selected IPv4, do the following:
–
Select
IPv4 Address Mode
and then select
Static
or
DHCP
.
If you selected DHCP, you are finished.
–
If you selected Static address mode, specify the following:
IP Address
(The OneExpert DSL's IP address to the access the provider network),
Netmask
(IP devices use a netmask IP address to determine if IP packets are to be
routed to other networks or sub-networks)
Gateway
(The OneExpert DSL OneExpert DSL's gateway address. When an IP device
has determined that a packet is not addressed to it or devices on the same sub-network
(subnet), it sends all such packets to the gateway address for further routing to the
correct address.
DNS Server
(If the IP Mode is Static enter the address of the DNS server.)
e
If you selected IPv6, do the following:
–
Select
IPv6 Address Mode
and then select
Manual
,
Stateles
or
DHCPv6
.
If you selected DHCPv6, you are finished.
–
If you selected Stateless address mode, specify the following:
IPv6 DNS Address Mode
(how the OneExpert DSL obtains the DNS address) and then
select
Manual
or
DHCPv6
.
Summary of Contents for OneExpert DSL
Page 1: ...OneExpert DSL User s Guide...
Page 2: ......
Page 16: ...About this Guide Conventions OneExpert DSL User s Guide xiv 22052280 Rev 000 April 2014...
Page 119: ......
