JDS Uniphase IP Video Test Option HST-3000, User Manual

Page: 281 / 356

Appendix A Test Results
Summary results
HST-3000 Ethernet Testing User’s Guide
259
default. Therefore frames (such as ARP requests and replies,
VLAN frames, etc.) that are not MPLS encapsulated will not
populate the results.
The following sections describe the test results for each of the
categories. The test results for each category are listed alpha-
betically.
Summary results
The Summary category automatically displays error results
that are non-zero, key results that are out-of-specification, or
key informational results. This allows quick access to the
results without having to search through each category.
If your HST has the optional color display, a green background
indicates that all summary results are OK, and that no errors
were detected on the circuit. A yellow background indicates
that conditions occurred that do not necessarily constitute
errors, but warrant additional investigation. For example, if the
HST gained pattern synchronization, but then lost it, the
Summary Result window will be yellow. A red background
indicates that errors did occur on the circuit.
Table 15 describes the results that appear in the Summary
category.
Table 15 Summary results
Result Definition
Acterna Payload
Errors A count of received IP packets containing
Acterna Payload checksum errors.
NOTE: This result only appears if you
receive an Acterna payload, and there are
payload errors in the received data
stream.