Chapter 3 Ethernet Testing
OAM service and link layer testing
98
HST-3000 Ethernet Testing User’s Guide
4 Go to the S-OAM AIS configuration menu, and then spec-
ifying the following:
Specify Domain
Select one of the follow-
ing:
–
If you are testing per
IEEE 802.1ag, select
Yes.
–
If you are testing per
ITU-T Rec. Y.1731,
select No.
MD ID
(Specify Domain must be
yes)
If you indicated that you
want to specify a domain
ID, enter the ID using up
to 22 characters.
The instrument uses the
ID that you specify to indi-
cate whether CCMs are
detected with different
IDs.
MA ID
Specify the Maintenance
Association ID, using up
to 25 characters.
The instrument uses the
ID that you specify to indi-
cate whether CCMs are
detected with different
IDs.
Setting
Parameters
AIS State
If you want to test AIS,
select On; otherwise,
select Off, and proceed to
.
NOTE: When you turn this
On, AIS will be transmitted
continuously.
Setting
Parameters
Summary of Contents for IP Video Test Option HST-3000
