Chapter 7
AutoTest Mode
AutoTests Tab
DSAM Help User Guide
Rev. 001
119
16
Press the
Done
softkey.
17
Press the
Start
softkey.
The AutoTest in Progress screen is displayed, then the results are
displayed.
Figure 110
AutoTest – AutoTest in Progress
NOTE
The Help system is disabled during all tests while they are in prog-
ress.
To stop the Combo Test, press the
Stop
softkey.
NOTE
To save the results to a file, press the
Save
softkey then follow
under
If you chose the wrong limit set before conducting the test, press
the
Limits
softkey and select a different limit set to view your test
results in relation to a different limit set without rerunning the test.
21128026 R001 DSAM Help User Guide.book Page 119 Thursday, February 5, 2009 2:02 PM
