Chapter 8
Measure Mode – Basic Tab
Full Scan
DSAM Help User Guide
Rev. 001
167
10
Using the arrow keys and the
Enable
softkey, select channels to
include in the scan.
11
Press the
Done
softkey.
Enabling Audio
Carrier Level for
Full Scan
When audio carrier level measurement is enabled, each vertical bar
that represents a channel level reading has two colors (if that channel
has audio level reading). The audio level part of the bar is gray and
video level part is black, so the delta portion is clearly displayed.
To enable audio carrier level measurement
1
Press the
Settings
softkey.
2
Using the arrow keys, select
Show Audio
.
3
Press
ENTER
.
View Menu
To access different functions and shortcuts to other tests
1
Press the
View
softkey.
2
Using the arrow keys, select one of the following options:
–
Auto Reference (Shift, 9)
– Enables you to automatically view
measurement results in the best reference setting on the
graph.
Figure 152
Measure Mode – Enable/Disable Channels
NOTE
Audio level measurement is not applicable to single type, DOCSIS,
or digital channels.
21128026 R001 DSAM Help User Guide.book Page 167 Thursday, February 5, 2009 2:02 PM
