JDS Uniphase CellAdvisor JD780A Series, User Manual

Page: 370 / 592

JD780A Series Analyzers
370
Using EV-DO Signal Analyzer
Introduction
The EV-DO Signal Analyzer of the JD780A series performs power and spectrum measurements as
well as modulation analysis to test the proper transmitter performance of EV-DO systems. It performs
conformance testing according to the following standards providing a simple Pass/Fail indication on
each test.
 3GPP2 C.S0024-B. cdma2000 High Rate Packet Data Air Interface Specification
 3GPP2 C.S0032-B. Recommended Minimum Performance Standards for cdma2000 High
Rate Packet Data Access Network
You may alter the measurement parameters for specialized analysis. Pass/Fail testing with standard
defined or user defined upper and lower limits and the Pass/Fail indictor help you to determine base
station performance easily.
This instrument provides the following measurement tools for EV-DO system:
 Spectrum Analysis
 RF Analysis
-
Channel Power
-
Occupied Bandwidth
-
Spectrum Emission Mask (SEM)
-
Adjacent Channel Power Ratio (ACLR)
-
Multi-ACPR
-
Spurious Emissions
 Power vs. Time: Idle Slot and Active Slot
 Modulation Analysis
-
Constellation
-
Code Domain Power
-
MAC Codogram
-
Received Code Strength Indicator (RCSI)
-
MAC CDP Table
 Auto Measure
 Power Statistics CCDF
 Over The Air (OTA)
-
Channel Scanner
-
PN Scanner
-
Multipath Profile
-
Code Domain Power
-
Route Map
Display overview
Figure 175 provides descriptions for each segment of the measurement screen.