Chapter 5
Launching a reflectometry test and displaying results
Advanced functions in OTDR Expert mode
User Manual
770000102/08
57
Result of slope measurement
The result is displayed on the screen between the two slope indicators
[ and ].
The measurement results are also available in the table:
1
Press
Exit
to return to the initial results page.
2
Select
Trace
using
Trace/Summary
soft key
3
Press validation key (
or
E
NTER
) to display results table under
the trace.
"Distance" shows the distance between the beginning of the trace and
the end of the slope;
If no result is displayed in the table, this means that the distance between
the cursors A and B is too small.
Deleting a slope measurement
To delete a particular slope measurement result:
1
Superimpose the cursors A and B on the slope concerned
2
Select
Slope
(after, if necessary, pressing
Advanced
>
Manual
Meas.
).
3
Press validation key (
or
E
NTER
) : the slope of the specified
trace section is deleted.
Fig. 32
Manual Measurement results
Slope
MTS2100 4100 Module US rev08.book Page 57 Jeudi, 1. août 2013 1:43 13