Chapter 5
Launching a reflectometry test and displaying results
Advanced functions in OTDR Expert mode
54
User Manual
770000102/08
2
Press the direction keys
and
, as many times as
necessary, until the active trace is displayed in green.
or
Click on the trace numbers in the upper right side of
the result page until the trace desired is selected.
or
Click on the upper part of the screen, in Trace information zone to
scroll the traces.
Traces display in
double acquisition
mode
When a double acquisition has been performed, i.e. a short acquisition
preceding a standard one (see
“Smart Acquisition (not available in Multi-
), two traces are displayed in the same window.
The short trace is the one resulting from the short acquisition and stops
while the standard one continues until the end of measurement.
Advanced functions in OTDR Expert mode
Several actions on trace displayed can be performed in ExpertOTDR
mode only.
traces
numbers
NOTE
Actions relative to traces (move cursors, move on events...) are exclu-
sively done on the active trace (in green), not on the other ones.
Fig. 31
Traces display in double acquisition mode
Short acquisition
(in blue)
Standard acquisi-
tion (in green)
MTS2100 4100 Module US rev08.book Page 54 Jeudi, 1. août 2013 1:43 13