Chapter 4
Configuring the reflectometry test
Configuring the test in OTDR Expert
User Manual
770000102/08
31
or
Press
Default Filename
to apply the name by default to the file:
Fiber[Cable_Id][Fiber_Num]_[Lambda]_[Direc-
tion][Pulse]
The name of the file is displayed in grey under
Filenaming
parameter
File Content
In this parameter, select the file content for traces saving:
One Trace
in case of traces in overlay, each trace is saved in a
distinct file (.sor extension).
All Traces
in case of traces in overlay, all traces are saved in
one single file (.msor extension).
Save Mode
When a trace or more is displayed, in the parameter
Save Mode
, you can
select three types of methods for storing traces:
–
File Only
: only the trace(s) is/are stored in one/several file(s), with
its extension (.sor, .msor)
–
File + txt
; the trace(s) is/are stored in one/several file(s), with its
extension and one txt file is also generated.
–
File + pdf
: the trace(s) is/are stored in one/several file(s), with its
extension and one pdf file is also generated.
Auto Store
Select
Yes
to store automatically the trace or traces resulting from each
acquisition according to the filenaming rules.
Fig. 14
Filenaming - Edition keypad
Predefined
parameters for
naming files
MTS2100 4100 Module US rev08.book Page 31 Jeudi, 1. août 2013 1:43 13