Chapter 9
File management
File Setup menu
User Manual
770000102/08
133
Location A
The name of the Location A of the link may be entered here.
Location B
The name of the Location B of the link may be entered here.
Operator
Use the arrow
to enter the name of the operator carrying out the
measurement, using the edition keypad.
Comment
In contrast to the other data in this menu, the comment is specific to a
fiber. This line is thus used to enter a new comment and not to display it.
The comment appears at the top of the screen, with the other parameters
of the fiber (see
).
This comment will remain available for the next acquisition, unless it is
deleted. It is also saved when a trace is saved with a comment.
File export (T-
BERD/MTS
4000 only)
This sub-menu appears when in the System Settings screen, in File
Export, the Send mail parameter is configured with Ethernet (see the
base manual of the T-BERD/MTS 4000)
To send a mail, you must have filled the 2 following fields:
Mail to
Enter in the edition window, and enter the name of
the recipient.
Subject
Using the same key, enter the subject of the mail or
a comment if necessary. See 4000 Base Unit User
Manual for a description of files sending
configuration
Buttons on the
right of the
screen
Saving traces
Three buttons are used to save one or more traces.
–
Store Trace
: allows to save the current trace opened.
–
Store all Traces
: allows to store all the traces displayed in
overlay (OTDR) in one single file.
–
The softkey
Next Trace
is used to activate the menu of the
following trace, when several OTDR traces are in overlay.
MTS2100 4100 Module US rev08.book Page 133 Jeudi, 1. août 2013 1:43 13