Chapter 9
File management
File Setup menu
130
User Manual
770000102/08
Rules for naming
files (Filenaming
parameter)
In the name of the file, it is possible to program automatic inclusion of
parameters such as the name of the fiber, identifiers (of the cable, its
origin, its end) or the measurement parameters (direction, resolution,
wavelength, pulse length...).
The
Filenaming
line shows the current filenaming rules and can be used
to modify them.
To edit or modify these rules:
1
Go to the
Filenaming
line
2
Press
to call up the edit menu
3
Select the desired characters and parameters
4
Select
Enter
or
Cancel
to quit the edit screen (according to whether
the modifications are to be applied or not).
The key
Default Filename
is displayed when the line
Filenaming
is
selected, and allows to apply the file default name to the trace opened.
Example of filenaming:
Default Filename for FCOMP results
Filenaming convention in Fiber View
In Fiber View, the filenaming convention is as follows:
[Fiber_Id][Fiber_Num]
Fig. 87
Editing filenaming parameters
Pre-defined
parameters
(FCOMP files)
File parameters
Filenaming rules selected
Filename obtained
Cable Id = Cable A
Fiber number = 1
ABC_[Cable_Id]Fiber-[Fiber_Num]
ABC_CableA_Fiber-1
MTS2100 4100 Module US rev08.book Page 130 Jeudi, 1. août 2013 1:43 13