JDS Uniphase 4100, User Manual, Page: 135 / 182

Chapter 8
FiberComplete Modules
Configuring the units
User Manual 770000102/08 115
Automatic configuration
Press the key
Auto Setup
to configure automatically the acquisition
parameters as follows:
– Lasers:
All
– Loss Measurement:
Bidir.
– ORL Measurement:
Bidir.
– Distance:
Yes
– OTDR Measurement:
No
– Fault Finder:
No
– Table View:
Fiber
– Threshold:
JDSU Default
Configuring the
file saving for
FiberComplete
results
Once the configuration of measurement is performed, the saving param-
eters of files from FiberComplete tests can be defined:
1
Press
F
ILE
hardkey
2
Select Setup on the softkey
Explorer / Setup
.
A screen as the following one displays:
3
Define parameters for file saving (see “File Setup menu” on
page 128 ).
Fig. 73
Configuration of FiberComplete files
The following parameters defined in the File > Setup page of the
master unit are automatically applied/transferred to the slave
unit: Filenaming - Save mode - Change Fiber Nbr - Fiber Number
- Direction.
MTS2100 4100 Module US rev08.book Page 115 Jeudi, 1. août 2013 1:43 13