Chapter 8
FiberComplete Modules
Establishing References
User Manual
770000102/08
109
Loopback
Referencing
method
The loopback referencing is used when the two units are at different loca-
tion.
After clicking on
Loopback
, the wizard will guide you through two steps:
1
The self reference is used for loss and ORL testing. Connect the
jumper from the module port to the mainframe powermeter and
press
Ok
to start referencing.
The reference values are stored and displayed at the end
1
The zero ORL reference is necessary for ORL testing. Once the self
reference measurement has been carried out, the Zero ORL adjust-
ment can be performed
Fig. 68
Select the reference to be performed
Fig. 69
Self reference
Power meter of
the 2000 platform
OTDR
Module port
MTS2100 4100 Module US rev08.book Page 109 Jeudi, 1. août 2013 1:43 13