JCM Technologies ACCESS 500, User Manual

Page: 8 / 8

Errors
Display Type of error
Err.M Memory error: memory card not inserted or faulty.
Err.M Memory error: memory card with incorrect format (from other equipment). Emits a beep.
Err.E Events error: wrong events card.
Err.E Events error: events card with incorrect format (from other equipment). Emits a beep.
Err Wrong password
Important safety instructions
Disconnect the power supply whenever you proceed to the installation or repair
of the equipment.
In compliance with the European Low Voltage Directive, we inform you of the following requirements:
• When the devices remain permanently connected, an easily accessible connecting device must be incorporated into the wiring.
• This system must only be installed by qualified professionals that have with automated garage doors and knowledge of the rel-
evant European standards.
• The user instructions for this device must always be in the user’s possession.
• The operating frequency of the receiver does not interfere in any way with the 868 MHz remote control systems.
Use of the equipment
This device is designed for applications with an automated garage door. It is not guaranteed for the direct activation of devices
other than those specified. The manufacturer reserves the right to change the device specifications without warning.
Regulatory Data
EU Declaration of conformity
The manufacturer JCM TECHNOLOGIES, S.A. declares that the product ACCESS 500 complies with the relevant fun-
damental requirements of the RED Directive 2014/53/EU and of the RoHS Directive 2011/65/EU.
See website www.jcm-tech.com/declarations/
JCM TECHNOLOGIES, SA
C/COSTA D'EN PARATGE, 6B
08500 VIC (BARCELONA)
SPAIN
jcm technologies
8
UM_3201378_Access-500_EN_Rev00