jcm-tech RB3 T868, User Manual

Page: 51 / 84

Batteries
Storage
• Store the lithium cells in a cool, dry and ventilated area far from fires and heating
sources.
• It is recommended the use of a non-combustible structure and keep adequate clear-
ance between walls and batteries.
• The maximum temperature suggested for the storage is +30°C.
• Higher temperatures are allowed but cause an increase in the self discharge of the
battery and speed up the process of passivation.
• In any case, never go over 100°C, as the batteries can break and cause a leakage.
• Arrange adequate protections to avoid possible damages to the batteries.
• Keep the batteries in their original packages until they are used.
• Do not expose the batteries directly to the sun light.
• Do not put a higher number of cartons one on another (respect what indicated).
• If in the same place are storage batteries with a total capacity >50,000Ah, it is
suggested to install an alarm for smoke and gas.
Usage
• If the battery is integral, store and handle with care (it is suggested to handle the bat-
teries in a ventilated place, do not smoke, eat or drink during the assembly).
• Do not expose at temperature higher than 100°C (it is recommended <85ºC).
• Avoid short circuit, crush, and exposition to heat sources.
• Do not disassemble the batteries or the battery packs, do not throw them in the fire,
do not perforate them, do not overheat or wet them.
• Material to avoid: water, oxidizing agents, alkalis.
Before disposing of the equipment, remove the batteries and dis-
pose of them at a proper place of disposal.
jcm technologies
23