background image

 P/N 960-100189R_Rev. 4 {EDP #148850}

 © 2016, JAPAN CASH MACHINE CO., LTD.

3 - 1

 VEGA™ Series

 Banknote Validator

S e c t i o n   3

3  COMMUNICATIONS

Americas

JCM A

MERICAN

 

Phone: +1-702-651-0000 

Fax: +1-702-644-5512

925 Pilot Road, Las Vegas, NV 89119 

E-mail: [email protected]

Europe, Middle East, Africa & Russia

JCM E

UROPE

 G

MB

Phone: +49-211-530-645-60 

Fax: +49-211-530-645-85

Mündelheimer

 Weg 60 

D-40472 

Düsseldorf

 Germany

E-mail: [email protected]

UK & Ireland

JCM E

UROPE

 (UK O

FFICE

)

Phone: +44 (0) 190-837-7331

Fax: +44 (0) 190-837-7834

Unit B, Third Avenue 

Denbigh West Business Park

Bletchley, Milton Keynes,

Buckinghamshire MK1 1DH, UK

E-mail: [email protected] 

Asia and Oceania

JCM G

OLD

 (HK) L

TD

Phone: +852-2429-7187 

Fax: +852-2929-7003

Unit 1-7, 3/F., Favor Industrial Centre 

2-6 Kin Hong Street, Kwai Chung,

N.T. Hong Kong

E-mail: [email protected] 

J

APAN

 C

ASH

 M

ACHINE

 C

O

., LTD. (HQ)

Phone: +81-6-6703-8400 

Fax: +81-6-6707-0348

2-3-15, Nishiwaki, Hirano-ku, Osaka 547-0035 
JAPAN

E-mail: [email protected]

The JCM Website for all locations is:

 

http://www.jcmglobal.com

This section was intentionally left out due to a Non-Disclosure Agreement requirement.

If this information is required, please contact the closest office location listed below:

Summary of Contents for VEGA Series



















































































































Reviews: