© 2013, JCM American, Corporation
1 7
July, 2013
Lecture Notes
S
OFTWARE
D
OWNLOAD
P
ROCEDURE
(C
ONTINUED
2)
9. Once the download is com-
plete, the Front Panel LED
Display turns a steady
Blue
Color, and then the VEGA
returns to a Start-up Process
condition (e.g., the Front
Panel LED Display blinks
at a
Green
Color rate).
10.When the download is com-
plete, confirm that the
Host's Checksum and the
Device's Checksums match
each other
(e.g. [CRC:XXXX = CRC:XXXX]).
11.After verifying a CRC match between both Checksums, Mouse-click on the
"OK" Dialog Screen Button to close the UBA Downloader Program Screen.
Figure 10
UBA Downloader Progress Bar
Screen
a
b
NOTE: If the Host and the Device CRC Checksums do not match, the download
did not end correctly. Confirm that the download procedure is correct, and re-
perform the download procedure again.
NOTE: If the word "
Manual
" appears in the "
Reset
" Pull-down Menu (Review
b
); the Front Panel LED will sustain a steady
Blue
Color. In this case,
Return to the Start-up condition by pressing the adjacent "
Manual reset
" Screen
Button (Review Figure 8
c
) located to the right of the pull-down Menu (The Front
Panel LED will then blink at a
Green
Color Rate).
NOTE: If a download error occurs, the Front Panel LED will light a
Red
Color.
