Troubleshooting
iVIZION™2 Series Banknote Validator Foundation of Intelligent Validation
Section 8
© 2022, JAPAN CASH MACHINE CO., LTD.
3 5
LED Reject Codes; Banknote
Table 24
LED Reject Codes; Banknote
Status LED
Error
Solution
Relative Part/Sensor
Green
Flashes
(1)
Banknote Insertion Error
Banknote is rejected by a
skew detection
•
Clean the relative Sensor(s) if they are
dirty or foreign objects are adhering to
them.
•
Calibrate the relative Sensor(s) as
needed.
•
Sensors of the Validator
Green
Flashes
(2)
UV Point Sensor Error
A Banknote was rejected by
the UV Point Sensor
•
Clean the relative Sensor(s) if they are
dirty or foreign objects are adhering to
them.
•
Calibrate the relative Sensor(s) as
needed.
•
Sensors of the Validator
Green
Flashes
(3)
Banknote remaining Error
(Validator)
A Banknote was rejected as
the Validator detected a
remaining Banknote left
inside
•
Clean the relative Sensor(s) if they are
dirty or foreign objects are adhering to
them.
•
Calibrate the relative Sensor(s) as
needed.
•
Sensors of the Validator
Green
Flashes
(4)
Reserved
-
-
Green
Flashes
(5)
Transport Time-Out Error
The timing of transporting a
Banknote was not appropriate
•
Clean the relative Sensor(s) if they are
dirty or foreign objects are adhering to
them.
•
Calibrate the relative Sensor(s) as
needed.
•
Sensors on the Transport
Path
Green
Flashes
(6)
Denomination Error
A Banknote was rejected due
to the denomination
verification result
•
Clean the relative Sensor(s) if they are
dirty or foreign objects are adhering to
them.
•
Calibrate the relative Sensor(s) as
needed.
•
Sensors of the Validator
Green
Flashes
(7)
Reserved
-
-
Green
Flashes
(8)
Photo Level Error
A Banknote was rejected due
to the transmissive level
result
•
Clean the relative Sensor(s) if they are
dirty or foreign objects are adhering to
them.
•
Calibrate the relative Sensor(s) as
needed.
•
Sensors of the Validator
Green
Flashes
(9)
INHIBIT Error
A Banknote was rejected due
to the INHIBIT Settings
(Banknote acceptance is
inhibited).
No Command is returned to
Escrow
•
Check that the INHIBIT settings on a
Host Machine or iVIZION2 DIP Switches
is appropriate.
•
INHIBIT Settings on the
Host Machine
•
INHIBIT Settings on the
iVIZION2 Unit
Green
Flashes
(10)
Reject Request
The Host Machine requested
for reject
•
Check that the INHIBIT settings on a
Host Machine is appropriate.
•
INHIBIT Settings on the
Host Machine
Green
Flashes
(11)
Reserved
-
-
Green
Flashes
(12)
Reserved
-
-
Summary of Contents for iVIZION2 Series
Page 6: ...P N 960 000231R_Rev A 2022 JAPAN CASH MACHINE CO LTD iv THIS PAGE INTENTIONALLY LEFT BLANK...
Page 8: ...P N 960 000231R_Rev A 2022 JAPAN CASH MACHINE CO LTD v i THIS PAGE INTENTIONALLY LEFT BLANK...
Page 10: ...P N 960 000231R_Rev A 2022 JAPAN CASH MACHINE CO LTD viii THIS PAGE INTENTIONALLY LEFT BLANK...