JCM GLOBAL iVIZION2 Series, Integration Manual

Page: 26 / 54

Section 4 iVIZION™2 Series Banknote Validator Foundation of Intelligent Validation Connector Pin Assign-
P/N 960-000231R_Rev. A © 2022, JAPAN CASH MACHINE CO., LTD.
1 6
Photo-Coupler Isolation Connection
Table 14 Photo-Coupler Isolation Connection Pin Assignments
Pin No. Signal Name
I/O
*
*. I/O (input/output) is the terminal as viewed from the Unit’s side.
Function
1 24VDC POWER 12V DC - 24V DC Power
2 M-RESET IN Banknote Validator Master Reset Input Signal Line
3 USB1- IN/OUT -
4 USB1+ IN/OUT -
5 USB1 GND
SG
†
†. SG = Signal Ground
-
6 TTL-TXD OUT -
7 TTL-RXD IN -
8 LED POWER OUT LED Drive Line (anode)
9 24VDC POWER 12V DC - 24V DC Power
10 232GND
SG
†
-
11 TXD OUT Serial Connection Output Signal Line
12 I/F +12V IN Interface Power Supply (+12V DC)
13 VBUS1 IN -
14 VBUS0 IN/OUT USB0 Connection Vbus Signal Line (+5V DC) to FUZION
15 TTL-G
SG
†
-
16 LED- IN LED Drive Line (cathode)
17 ccTalk(P) IN/OUT -
18 POWER GND POWER 0V DC Power
19 I/F GND
SG
†
Photo-Coupler Isolation Connection Ground
20 RXD IN Serial Connection Input Signal Line
21 USB0+ IN/OUT USB0 Connection Input/Output Signal Line to FUZION
22 USB0- IN/OUT USB0 Connection Input/Output Signal Line to FUZION
23 USB0 GND
SG
†
USB0 Connection Ground (0V DC) to FUZION
24 SU SELECT IN No Connection = SS
25 ccTalk(S) IN/OUT -
26 POWER GND POWER 0V DC Power
Interface/Power Connector
9
17
26
1
10
18
(Frame Side)
Socket Housing (Validator): DR1B026JA1 (JCM)
Socket Housing (Frame): DR1R026PA1 (JCM)
Contact Type (Validator): D02-22-26P-10000 (JAE) (Except Pin #1, #9, #18 and #26)
Contact Type (Frame):D02-22-22P-10000 (JAE) (Pin #1, #9, #18 and #26)
Recommended Wire: Refer to “Recommended Wires” on page 14