![background image](http://html1.mh-extra.com/html/jcb/js130/js130_service-manual_3610745505.webp)
2 - 2
Replacement
1
Before fitting the idler wheel, check the oil level at
A
.
If required, top up with the specified oil (see section 3).
Assemble the idler wheel to the recoil unit and fit the
mounting bolts.
2
Fasten a sling around the idler wheel and recoil
assembly and enter it into the undercarriage.
3
Position the idler wheel in the undercarriage using a
bar.
4
Connect the track link (see
Track Motor/Reduction
Gearbox
,
Removal and Replacement
, Section F).
Apply grease through the check valve to adjust the
track tension (see
Checking/Adjusting the Track
Tension
, Section 3).
Section J
Track and Running Gear
9803/6410
Section J
2 - 2
Issue 1
Idler Wheel and Recoil Unit
Summary of Contents for JS130
