7 - 1
Section 1
General Information
9803/6410
Section 1
7 - 1
Issue 1
Sealing and Retaining Compounds
JCB Multi-Gasket
A medium strength sealant suitable for all sizes of gasket
flanges, and for hydraulic fittings 25-65 mm diameter.
4102/1212
JCB High Strength Threadlocker
A high strength locking fluid for use with threaded
components.
4102/0551
JCB Retainer (High Strength)
For retaining parts which are unlikely to be dismantled.
4101/0651
JCB Threadlocker and Sealer
A medium strength locking fluid for sealing and retaining
nuts, bolts, and screws up to 50 mm diameter, and for
hydraulic fittings up to 25 mm diameter.
4101/0251
JCB Threadlocker
A locking fluid for use on threads larger than 50 mm
diameter.
4101/0451
50ml
JCB Threadlocker and Sealer
A medium to high strength locking fluid for retention
(High Strength)
and sealing of ram piston heads.
4101/0552
JCB Activator
A cleaning primer which speeds the curing rate of
4104/0251
Aerosol
anaerobic products.
4104/0253
Bottle
JCB Cleaner/Degreaser
For degreasing components prior to use of anaerobic
4104/1557
Aerosol
adhesives and sealants.
Anti-Seize Paste
A compound used for assembly and prevention of parts
seizure.
4003/0211
Direct Glazing Kit
For one pane of glass; comprises items marked
†
below
plus applicator nozzle etc.
† Ultra Fast Adhesive
For direct glazing
4103/2109
310 ml
† Active Wipe 205
For direct glazing
4104/1203
250 g
† Black Primer 206J
For direct glazing
4201/4906
30 ml
Clear Silicone Sealant
To seal butt jointed glass.
4102/0901
The part numbers and descriptions of sealing and retaining compounds available from JCB Service have been revised with
effect from January 1997 (see MI 563/H, 507/HA, 511/E).
References to these products on subsequent pages in this service manual will be progressively updated, but for convenience a
cross reference table is shown below.
Old Description
Old Part Number
New Description
New Part Number
JCB High Strength Threadlocker
4102/0502
JCB High Strength Threadlocker
4102/0551
JCB High Strength Retainer
4101/0602
JCB Retainer (High Strength)
4101/0651
JCB Lock & Seal
4101/0202
JCB Threadlocker & Sealer
4101/0251
Loctite 243
4101/1101
Use 4101/0251
JCB Multi-Gasket
4102/1204
JCB Multi-Gasket
4102/1212
High Strength Lock and Seal
4104/0502
JCB Threadlocker & Sealer (High Strength)
4101/0552
JCB Threadlocker
4101/0402
JCB Threadlocker
4102/0451
Loctite Activator N
4104/0101 Aerosol
JCB Activator
4104/0251
4104/0102 Bottle
4104/0253
Super Clean Safety Solvent
4104/0601 Aerosol
No longer available, Replaced by
4104/1557
JCB Cleaner & Degreaser
4104/1538 Aerosol
JCB Cleaner/Degreaser
4104/1557
Note:
High Strength Threadlocker was previously called High Strength Gasketing (4102/0502).
Summary of Contents for JS130
