Routine Maintenance
Cleaning the Machine
195
195
9811/9950-1
!M
CAUTION
The engine or certain components could be damaged
by high pressure washing systems; special
precautions must be taken if the engine is to be
washed using a high pressure system.
Ensure that the alternator, starter motor and any other
electrical components are shielded and not directly
cleaned by the high pressure cleaning system.
ENG-3-3
Important: Do not aim the water jet directly at bearings, oil
seals or electrical and electronic components such as the
engine electronic control unit (ECU), alternator or fuel
injectors.
Use a low pressure water jet and brush to soak off caked
mud or dirt.
Use a pressure washer to remove soft dirt and oil.
Note: The machine must always be greased after
pressure washing or steam cleaning.
Preparing the Machine for Cleaning
P11-3004
1
Make the machine safe with the excavator lowered.
Refer to
Prepare the Machine for Maintenance
.
Important: Stop the engine and allow it to cool for at least
one hour. Do not attempt to clean any part of the engine
while it is running.
2
Make sure that all electrical connectors are correctly
coupled. If connectors are open fit the correct caps or
seal with water proof tape.
HE Services
Summary of Contents for 8026 CTS
