![background image](http://html1.mh-extra.com/html/jcb/8026-cts/8026-cts_operators-manual_3586664124.webp)
Operation
Starting the Engine
106
106
9811/9950-1
Immobiliser
There are two different JCB immobiliser systems, one uses
a keypad and the other a unique key system.
Note: If your machine has an immobiliser system installed,
then your JCB dealer should enable the system as part of
the standard machine installation.
Keypad Immobiliser System
T2-028_5
To Disarm the Immobiliser
Note: You have three attempts to disarm the system, the
forth attempt will lock the system for 30 minutes. It then
resets and you will have three more attempts.
Note: If you wait more than eight seconds between button
presses, then the immobiliser will go into error mode.
1
Put the starter key in the starter switch.
2
Push the
MD
button, then enter your four-digit PIN
number. The LED
A
flashes when you push a button.
3
Push the
ENT
button.
The LED
A
flashes twice when you enter an incorrect
PIN number. You must complete step 2 again.
The LED
A
comes ON for three seconds after you
enter a correct PIN number. Continue to step 4.
4
Start the engine as shown in
Starting the Engine
.
HE Services
Summary of Contents for 8026 CTS
