©2019 JBT LEKTRO, INC. All rights reserved.
October 2019
4-7
CHAPTER 4: COMPONENTS & CONTROLS
Note
Seat controls and locations may vary depending on your tractor configuration.
4.3.2
CONTROL CONSOLE
The Control Console is laid out as follows:
This area includes the following controls:
•
Steering Wheel (1):
Turns the steer wheels located just forward of the operator’s position,
with power assist from the vehicle hydraulic system. The vehicle responds similarly to a
forklift when turning.
•
Console Release Lever (2):
Allows you to raise or lower the Control Console for ease of
access or operator comfort. An adjustable knob at the end of the lever allows you to adjust
the locking mechanism tightness.
> Move the Console Release Lever away from the steering column to release it, then move
the Control Console up or down.
> Always verify that the Control Console is securely locked in position before driving.
DANGER
OPERATING THE TRACTOR WITH A LOOSE CONTROL CONSOLE MAY CAUSE
YOU TO LOSE CONTROL OF THE VEHICLE. ALWAYS VERIFY THAT THE
CONTROL CONSOLE IS SECURELY LOCKED IN POSITION BEFORE OPERATING
THE VEHICLE.
4
1
2
5
3
6
AUTHORED BY ANTHONY HERNANDEZ - (415)786-2081 - [email protected]
